ANthony 101 - Reversing Frame Hardware

Model 101/2100 Doors Service & Installation
TITLE:
99-13312-S001 Model 101/2100 Doors Service & Installation
REV.
B
Page 12 of 95
3. Push door into top frame with thumb until hinge pin plug snaps into place.
4. Adjust closing force by turning the screw on the front of the Torquemaster with a flat-
head screwdriver. Turn counter-clockwise to tighten, clockwise to loosen.
5. If necessary to square door in frame opening, turn end screw on Torquemaster
(marked SAG ADJ) with a flat-head screwdriver.
6. Do not use power tools for installation or removal.
8. Reversing Frame Hardware
1. Remove Torquemaster by turning center screw counter-clockwise.