ANthony 101 - Torquemaster Replacement; Door Gasket Replacement

Model 101/2100 Doors Service & Installation
TITLE:
99-13312-S001 Model 101/2100 Doors Service & Installation
REV.
B
Page 22 of 95
15. Torquemaster Replacement
Torquemaster
1. Torquemaster is used on all standard production frames.
2. To remove, insert flat-head screwdriver into top center cutout in Torquemaster and turn
screw 1/8” turn. If necessary, insert small flat-head screwdriver between edge of
Torquemaster and frame and gently pry up.
3. Reverse instructions to replace.
16. Door Gasket Replacement
Door
Gasket
1. Remove old gasket by starting in corner, gently pulling gasket away from plastic.