ANthony 101 - Ordering Replacement Doors

Model 101/2100 Doors Service & Installation
TITLE:
99-13312-S001 Model 101/2100 Doors Service & Installation
REV.
B
Page 21 of 95
3. To replace retainer and contact plate, lay contact plate flat on frame rail, insert top
front leg edge of retainer between the contact plate and the mullion. Snhap retainer on
back edge of mullion and perimeter of frame.
4. Contact plate for prewired ballast frame is 3-7/16” wide. Contact plate for non-
prewired frames is 2-1/2” wide.
14. Ordering Replacement Doors
Replacement Doors (All Swing Door Models)
1. Specify outside dimensions of door (measure to nearest 1/16”).
2. With or without heaters?
3. Hinge swing; left or right?
4. Specify model: Cooler or Freezer?
5. Specify finish.
6. Specify any custom items in the original order.
7. Specify date of original order and/or Anthony confirmation/invoice number. (Original
manufacture date is stamped on metal spacer bar between panes of glass, as shown
above.
8. With or without locks?
9. Specify voltage.