ANthony 101 - Door Reversing Instructions (1991 to Present)

Model 101/2100 Doors Service & Installation
TITLE:
99-13312-S001 Model 101/2100 Doors Service & Installation
REV.
B
Page 16 of 95
9. Carefully replace hinge pin access covers.
10. Do not use power tools for installation or removal.
11. See Model 101 & 2100 torque rod below.
10. Door Reversing Instructions (1991 to Present)
Door Quick Disconnect and Reversing
1. Reverse door hardware.
a. Remove cover plate from center hinge side of door.
b. Disconnect hinge pin connectors from door heater and/or glass heater connectors.
c. Pull hinge pin out through top of door.