ANthony 101 - Plastic Tag Molding Installation

Model 101/2100 Doors Service & Installation
TITLE:
99-13312-S001 Model 101/2100 Doors Service & Installation
REV.
B
Page 46 of 95
46. Plastic Tag Molding Installation
1. Tag molding is the exact length of the shelf’s upper front bar. Center tag molding on
front of shelf. Hook bottom of tag molding under shelf across entire width of shelf.
Spread thumbs across tag molding and push up.
2. Snap top corner of tag molding strip onto shelf front. Apply even pressure across top of
tag molding as it is fed onto top horizontal bar on shelf front.
3. For replacement tag molding, specify width of shelf when ordering.