ANthony 101 - Page 14

Model 101/2100 Doors Service & Installation
TITLE:
99-13312-S001 Model 101/2100 Doors Service & Installation
REV.
B
Page 14 of 95
2. On Hold-Open (1990 to Present), remove shoulder screw from camel back hinge on
back of door (Model 101 and 2100 Hold-Open Instructions).
3. Remove hinge pin plug from frame by inserting needle-nose pliers into hinge pin plug
1/8” hole. Compress and pull hinge pin plug away from frame.
4. Lift door out of Torquemaster. Lean door on its side against a stable surface.