Anticimex Smart Connect - Page 17

17
 3.Screwthetrap’sbackplateontothewalloroorwiththeincludedscrews/plugs.
Note: Be sure that the backplate is not twisted when it is screwed on and the screws are tightened.
4. Remove the battery cover. Insert 4 pcs. 3.6 V AA batteries into the trap.
Note: It must be 3.6 V AA batteries (article no. 300 908).
Press the battery cover back in place.
Note: Ensure that the battery cover is placed correctly, so the trap is mounted correctly onto the
back plate.
5. Insert the bait in the trap’s lure box.