Anticimex Smart Connect - Link Smart Catch

18
6. Arm the trap by tightening the red arm (mechanism) until you hear a click.
Link Smart Catch
1. Activate the Smart Catch and connect it to the Smart Connect and the rest of the Smart
Connect system by pressing
Note: To ensure that the Smart Connect device has a signal it must be linked at the location where it
is installed.
2. The LED light on the front of the trap lights steady green for about 10 seconds and then
 greenandyellowasheseveryhalfsecond.ThismeansthattheSmartConnectdeviceis
linked and have data connection.