Anybus Communicator - Clear and Revert Configuration

9.2. Clear and Revert Conguraon
You can restore all sengs in a conguraon to the default sengs.
Procedure
Figure 40. Files & rmware page
To Clear the Conguraon
When you want to clear a conguraon and return to the default sengs.
1. On the Files & rmware page, click Clear.
2. In the Conrm clear window, click Clear.
3. To apply the change, click Apply in the web-interface header, and follow the instrucons.
To Revert the Conguraon
When you want to remove any conguraon made in a current session and re-load the conguraon from the
gateway.
1. On the Files & rmware page, click Revert.
2. In the Conrm revert window, click Revert.
3. To apply the change, click Apply in the web-interface header, and follow the instrucons.
Clear and Revert Conguraon Anybus
®
Communicator
™
- PROFINET IO-Device to EtherNet/IP Adapter
SCM-1202-195 Version 1.0 Page 45 of 56