Anybus Communicator - PROFINET Station Name Settings; Ethernet;Ip Settings; Ethernet;Ip IP Settings

6.5.2. PROFINET Staon Name Sengs
Figure 17. EtherNet/IP page, Staon name
A PROFINET device is idened by its Staon name in the PROFINET network.
Enter a Staon name for the Communicator.
• The maximum allowed length of the Staon name is 240 characters.
• No symbol characters, punctuaon characters, or whitespace are permied.
• Write the Staon name as one single word.
6.6. EtherNet/IP Sengs
6.6.1. EtherNet/IP IP Sengs
To Use DHCP Server
Figure 18. IP Sengs, DHCP enabled
By default, DHCP is disabled.
To enable DHCP, select the DHCP enabled checkbox. The IP sengs will be provided by the high level network
DHCP server.
Anybus
®
Communicator
™
- PROFINET IO-Device to EtherNet/IP Adapter EtherNet/IP Sengs
Page 26 of 56 SCM-1202-195 Version 1.0