Anybus Communicator User Manual

10.2. Reset to Factory Sengs
Before You Begin
Procedure
To reset the Communicator:
1. Disconnect the Communicator from power.
Figure 45. Disconnect power
2. Use a pointed object, such as a ballpoint pen to press and hold the Reset buon.
Figure 46. Press and hold Reset buon
Anybus
®
Communicator
™
- PROFINET IO-Device to EtherNet/IP Adapter Reset to Factory Sengs
Page 50 of 56 SCM-1202-195 Version 1.0

Anybus Communicator Specifications

General

Protocols Supported	PROFINET, EtherNet/IP, Modbus TCP
Serial Interfaces	RS-232, RS-485
Ethernet Protocols	Modbus TCP, EtherNet/IP, PROFINET
CAN Protocols	CANopen
Operating Temperature	-25°C to +70°C
Storage Temperature	-40°C to +85°C
Humidity	5% to 95% non-condensing
Power Supply	24V DC
Enclosure	Plastic
Protection Class	IP20