APRILIA TUONO V4 R a-PRC ABS User Manual

•
2 Spacers (there are various types of spacers)
•
1 Exhaust valve opening cable
•
1 Exhaust valve closing cable
•
1 Instrument panel mounting cover
•
1 Heat-protecting cover
•
2 Adhesive sponge
•
1 Clamp
ENGINE
Materials used and corresponding quantities
The electrical system consists of the following cable harnesses and parts:
•
1 Engine cable harness
•
1 Engine speed sensor
•
1 Control unit 7SM
•
1 Air temperature sensor
•
1 H2O temperature sensor
•
2 Coil with short cable (Cylinder 1 and Cylinder 4)
•
2 Coil with long cable (Cylinder 2 and Cylinder 3)
•
1 Gear sensor
•
1 Secondary air solenoid
•
1 Front motorised throttle body
•
1 Rear motorised throttle body
•
2 MAP sensor
•
1 Alternator
•
1 Starter motor
•
N.4 - Injectors
Small parts and mountings
•
1 Control unit mounting
•
4 Large black 178x4 clamps
•
4 Self-tapping 5x20 screws
•
3 Self-tapping screws
•
3 Washers
•
3 Silentblocks
•
2 Self-tapping screws
•
4 AMP Superseal connector mountings
•
1 Mounting for the Framatome connector
•
2 Small black clamps
•
1 Rubber clamp
TUONO V4 R a-PRC ABS Electrical system
ELE SYS - 99

APRILIA TUONO V4 R a-PRC ABS Specifications

General

Brand	APRILIA
Model	TUONO V4 R a-PRC ABS
Category	Motorcycle
Language	English