Mask 100%
Status info Select to set Status info to On or Off. When set
to On, camera shooting parameters are
displayed across the top of the EVF-1's image,
outside the active image area and camera
status information is displayed across the
bottom of the EVF-1's image, outside the active
image area.
Framelines Select to set frame lines to On or Off. Frame
lines are a reference for framing that typically
consist of an image frame, a center mark and
an aspect ratio reference. See the appendix for
more information on the ALEXA frame line
format.
Select framelines 1 Select to set the main frame lines template
from those stored in the camera.
Select framelines 2 Select to set the secondary frame lines
template from those stored in the camera.
Center mark Select to set the Center mark to Off, Small Dot,
Medium Dot or Cross to aid in image framing.
User rectangles Select to display up to two additional user-
editable rectangles in the EVF-1 image.
Edit user
rectangles
Select to adjust the user rectangles.
Framelines color Select to set the color of the frame lines.
Framelines
intensity
Select to set the brightness of the frame lines.
11.3.2 Viewfinder CAM menu
Press the CAM button to open the Viewfinder CAM menu in the EVF-1
display and set camera parameters. Use the jogwheel on the EVF-1 to
select and set menu options. Press the CAM button to exit the
Viewfinder CAM menu.
FPS Select to set the sensor frame rate.
Preconfigured and previously added user-
defined values can be selected in the FPS list.
SHUTTER Select to set the shutter angle. Preconfigured
and previously added user-defined values can
be selected in the Shutter list.
To Next Page
Loading...
Need help?
General
