6 General Precautions
6.1 Storage and Transport
Use a lens port cap to prevent damage to the sensor cover glass
and sensor whenever there is no lens attached.
Unplug all cables when transporting the ALEXA in a camera
case.
Do not store the camera in places where it may be subject to
temperature extremes, direct sunlight, high humidity, severe
vibration, or strong magnetic fields.
6.2 Electromagnetic Interference
ALEXA meets EC regulations by fulfilling the specifications of the
European Directive 2004/108/EC (15th December 2004).
This equipment has been tested and found to comply with the limits for
a Class A digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate
the equipment.
Complies with the canadian ICES-003 Class A specifications. Cet
appareil numérique de la Classe A est conformé à la norme NMB-003
du Canada.
This device complies with RSS 210 of Industry Canada. This Class A
device meets all the requirements of the Canadian interference-causing
equipment regulation. Cet appareil numérique de la Class A respecte
toutes les exigences du Réglement sur le matérial brouilleur du Canada.
6.3 Condensation
To Next Page
Loading...
Need help?
General
