10.9.9. Transport
You can define the MIDI channel and CC number for each of the three main Transport
commands independently. All three must transmit the same type of MIDI information,
though: MMC, MIDI CC, or both.
• Transports (Range: Off, MIDI, MMC, Both)
• Stop Channel (Range: 1-16, User)
• Rec Channel (Range: 1-16, User)
• Play Channel (Range: 1-16, User)
• Stop CC (Range: 0-127)
• Rec CC (Range: 0-127)
• Play CC (Range: 0-127)
The Stop, Record, and Play channels can be set to the User channel. It is selected with the
User Channel [p.118] parameter.
♪: The BeatStep Pro will transmit its transport commands over MIDI but does not respond to
incoming transport control messages.
123 Arturia - User Manual BeatStep Pro - MIDI Control Center
To Next Page
Loading...
