Arturia beatstep pro - Muting a Drum

4.2.3. Muting a Drum
If you’d like to mute one or more drums while creating your pattern or during performance,
this is easy:
• Start in DRUM mode
• Hold the DRUM button
• Hold the MUTE button
• Press the pad that corresponds to the drum or drums you would like to mute. The
muted pads will light solid so you can see which ones are muted.

♪: When individual Drum tracks are muted the Mute button will flash. When the entire Drum
sequencer is muted the Mute button will be lit solid.
The same process is used to unmute the drums: hold DRUM + MUTE and press the desired
pads to unmute them one by one. If you'd like to unmute them all at once, just press the
MUTE button.
Arturia - User Manual BeatStep Pro - The Drum Sequencer 40