Arturia beatstep pro - Preset Link

5.8. Preset Link
When the PRST LNK button is lit the sequencer presets are linked, which makes it possible
to change the patterns on all three sequencers with a single action. You can use any one of
the sequencers to make the change:
• Press one of the single arrow buttons in the Sequencer control [p.11] section, or
• Hold the SEQ1, SEQ2 or DRUM button and press a Step button.
There’s a MIDI Control Center [p.84] preference related to the PRST LNK button that
determines whether the patterns will change to the same pattern number (the Absolute
setting) or be allowed to change to non-identical pattern numbers (the Relative setting).
Examples of each response are given in the Pattern Link [p.114] section of the MCC [p.84]
chapter.

♪: When the PRST LNK button is active the pattern will wait to change until the Drum pattern reaches
its end. If Polyrhythm Mode [p.63] is also active, the longest Drum track will determine when the change
will occur.
Arturia - User Manual BeatStep Pro - Projects 56