9. CONTROL MODE
9.1. What is Control Mode?
When BeatStep Pro is in Control Mode every encoder, button, and pad on the right half of
the unit can transmit specific MIDI data to external devices that are connected to the MIDI
output jack. This same data will be sent to your computer via USB.
The controller assignments can be set using the MIDI Control Center [p.84] software.
Here are some other things to know about Control Mode:
• The pads will not transmit directly to the CV/Gate or Drum Gate connectors.
• The sequencers continue to use the CV/Gate and Drum Gate connectors.
• The Transport buttons work the same as in the other modes.
• The CURRENT TRACK buttons are not available.
• The Step buttons can be configured to save/recall one of 16 Scenes [p.82].
79 Arturia - User Manual BeatStep Pro - Control Mode
To Next Page
Loading...
