Arturia beatstep pro - Synchronization; Sync Modes: Master and Slave

7. SYNCHRONIZATION
BeatStep Pro can be the master clock for an entire MIDI rig, or it can just as happily serve
as a slave to any one of several sources. See Making The Connections [p.5] for connection
diagrams.
You can cycle through the various Sync options using the SYNC button. A white LED will let
you know which mode you’ve selected.
For example, in the illustration below the USB sync option has been selected:

♪: When the unit is playing a sequence, the Sync setting cannot be changed.
7.1. As Master
BeatStep Pro is the master clock when the INT button is lit. When this is the case:
• The transport section will control the internal sequencers
• MIDI clock messages are sent to MIDI out, USB MIDI, and the Clock output
• The sequence tempo can be set using the TEMPO encoder and the TAP/METRO
button.
Arturia - User Manual BeatStep Pro - Synchronization 74