x
Product Overview
The AsantéHub 1012™ is a compact, powerful LAN hub that lets you create
high-speed Ethernet networks over ordinary, unshielded twisted-pair (UTP)
telephone wire. AsantéView network management software lets you manage the
AsantéHub 1012 network remotely, with graphical software that is intuitively easy
to use.
The AsantéHub 1012 offers complete flexibility in LAN wiring. Network devices
can be connected by way of twelve front panel 10BaseT ports, or to a punch-
down block using the rear panel Telco port. Hubs can be networked using the
3-In-1 Uplink with RJ45, BNC, and AUI ports. These ports support twisted-pair
and thin Ethernet wiring , as well as thick or fiber optic connections with the
appropriate transceiver. The 3-In-1 Uplink supports redundant physical links and
link auto-sensing.
AMS (AsantéView Management System) Link (RJ-45) ports provide dedicated
out-of-band network management daisy-chained connections to other hubs or to
a network management station located at the end of the chain. An RS-232 serial
port provides connection for a network management station, terminal, or modem
(for remote dial-up).
The AsantéHub 1012 offers comprehensive LED indicators for network status,
including per-port link/receive status, automatic and manual partitioning, network
utilization, and packet collision ratios. These indicators are reproduced in
graphical form in AsantéView. There are also warning indicators to monitor
troubleshooting for the AsantéHub.
In addition, the AsantéHub 1012 offers comprehensive, centralized LAN
management through AsantéView network management software. AsantéView
runs as an application on Macintosh computers or on PCs under Windows.
If you purchased the optional SNMP daughter board, AsantéView supports
network management based on the Simple Network Management Protocol
(SNMP). With this option, AsantéView can be run as part of a centralized
SNMP-based network management console, and information can be passed to a
third-party SNMP manager.
To Next Page
Loading...
