Asante 1012 - 10 Baset Network Specifications; Figure 3-5. Thick Ethernet Backbone Network

Network Planning
3-9
Figure 3-5. Thick Ethernet Backbone Network
10BaseT Network Specifications
This section provides an overview of the IEEE 802.3 specifications for 10BaseT
network configurations using thick, thin, and twisted-pair wiring.
Thick, thin, and twisted-pair network requirements are based on the IEEE 802.3
(Ethernet) specification for local area networks. Different drafts in the 802.3
specification describe requirements for each media type.
Specifications for each media type are listed below.