xi
Features
AsantéHub 1012 offers outstanding technical features in a compact, modern
design:
• Twelve 10BaseT Ports — Up to twelve network devices can
be connected to a single AsantéHub (thirteen, in a standalone
configuration).
• Auto-Sensing Network Ports — Auto-sensing network ports
with AUI, BNC and RJ-45 connectors support thick, thin or
10BaseT wiring.
• Redundant Link Support — The 3-In-1 Uplink can be
configured for redundant network links, for quick re-
establishment of network services in the event of a backbone
failure.
• 110/220 Volt Auto-Switch Power Supply — Installation at
foreign and domestic sites requires no special switch or jumper
settings.
• Dedicated Out-of-Band Network Management — AMS
(AsantéView Management System) Links can connect up to
eight hubs and span up to 2000 feet. The network
management station can be connected as a device on the
AMS Link, or directly to the RS-232 port on the hub. The RS-
232 port supports a local network management station,
terminal for local hub configuration, or modem for remote dial-
up.
• Fault-Isolated Network Management — Network
management and communications are isolated in hardware, so
that the status of the network management link does not affect
normal network services.
• In-Band Network Management — Optional plug-in SNMP
daughter-board supports SNMP-based network management;
completely software-configurable.
• Flexible placement — The AsantéHub's compact, modern
design allows it to be placed on a desktop, or in a telephone
closet via wall mounts or rack mounts. Rack and wall
mounting hardware is included with each hub.
To Next Page
Loading...
