Asante 1012 - Index

I-1
Index
10BaseT B-1
10BaseT, what is it? 3-1
3-in-1 Uplink, guidelines 1-8
5-4-3 rule 3-10
A
AC power source, for installation 1-14
AMS link
installation 1-31, 32, 33
termination 1-32, 33
AMS link, termination 1-9
AUI port connections 2-11
AUI port, guidelines 1-8
B
BNC network connections 1-26
BNC port, guidelines 1-8
Broadband connections 2-11
C
Cable construction C-4
Cable Specifications C-1
Compatibility vii
Configuration
modem dial string 1-10
PC or terminal 1-9
SNMP read community 1-10
SNMP write community 1-10
Configurations, network 3-6
Connectors 1-6
Connectors, SmartHub 2-5
Constructing a cable C-4
Contents of hub package 1-14
Cost of cabling C-2
Cross-over cabling, use of 2-8
D
Data transmission path, limits 3-10
Default setting
modem dial string 1-10
SNMP read community 1-10
SNMP write community 1-10
SYS contact Configuration
SYS contact 1-10
Default settings
AMS link.i.Configuration
AMS link port configuration 1-10
RS-232 port Configuration
RS-232 port configuration 1-10
Default settings, AsantéHub 1-8
Dimensions B-2
DIP switches, rear panel 1-23
E
EEPROM configuration, default setting 1-9
Electrical interference, near hub 1-14
Ethernet network connections (thin) 1-26
Existing Wiring 3-12
F
Factory default settings 1-8
Features list, SmartHub xi
Fiber optic connections 2-11
Front panel 1-1
Front panel features 1-1
Front panel status indicators 1-2
G
Glossary G-1
H
Hardware description 2-1
Host connections
LED display 1-18
Host connections 1-18
Host connections to hub 1-20, 21
Hub ID 1-8
Humidity, for hub 1-14
I
ID, hub 1-8