Asante 1012 - Page 25

Chapter 1
1-10
Table 1-3, cont. AsantéHub 1012 Factory Default Settings
7. Serial Port 0 (AMS Link): 9600 bps,
8 data bits, 1 stop bit, no parity
Cannot be modified.
8. Serial Port 1 (RS-232 port): 9600 bps,
8 data bits, 1 stop bit, no parity.
(Communication rate between hub
and PC or modem on RS-232 port.)*
For a PC, reconfigure in terminal menu
(see Out-of-Band Dial rate: 1200, 2400,
4800, 9600); view in AsantéView.
9. Node Age time: 60 seconds. (Storage
period for hub statistics.)
Configure in Node Summary window in
AsantéView.
10. SYS contact: none Configure using terminal menu, System
Administration Information.
11. SNMP Read Community String: public Configure using terminal menu, SNMP
submenu, or AsantéView Set Hub
Parameters window.
12. SNMP Write Community String: private Configure using terminal menu SNMP
submenu, or AsantéView Set Hub
Parameters window.
13. Modem Dial String: none Configure using terminal menu SNMP
submenu, or AsantéView Set Hub
Parameters window.
*Communication with a terminal is fixed at 9600 bps.