B-1
Appendix B.
Technical Specifications
This appendix describes the technical features of the AsantéHub 1012.
Standards Supported: IEEE 802.3 Ethernet specifications for thick
(10Base5), thin (10Base2), and unshielded
twisted-pair (10BaseT) media.
Data Rate: 10 Mbps
Maximum Cable Distances: 10BaseT (UTP) 100m (328 ft.)
10Base2 (thin) 185m (605 ft.)
10Base5 (thick) 500m (1625 ft.)
Ports: 13 Unshielded Twisted-Pair (UTP) device ports
1 Autoswitch 3-In-1 Uplink with three physical port options:
1 Attachment Unit Interface (AUI)
1 BNC Thin Ethernet
2 RJ-45
LEDs: 14 to indicate Link Integrity Status
14 to indicate Auto-partitioning Status
8 to show Hub Bandwidth Utilization
4 to show Collision Percentage
1 to show Late Collision
1 to show Alignment/CRC Errors
1 to show Runt/Fragmented Packets
1 to show Short Event/Missing SFD
1 to show CPU Activity
1 to show Message Waiting
1 to show SNMP Option present
1 to show Power on/off
1 to show Uplink Partition status (rear panel)
1 to show Uplink Link/Receive status (rear panel)
Power Requirements: Input Voltage: 100-240 VAC, 50-60 Hz
single phase; continuous
voltage input range
Input Current: 1.2A @ 100 VAC (max.)
0.5A @ 220 VAC (max.)
0.5A @ 100 VAC (typ.)
Electromagnetic Emissions: Meets FCC Class A requirements
Safety: Designed in accordance with UL 1950, CSA 22.2
No. 220, IEC 950, TUV and VDE requirements
To Next Page
Loading...
