ASCOM D62 Configuration Manual

TD 92639EN
08 December 2012 / Ver. H
Configuration Manual
Ascom d62 DECT Handset
36
• Call priority
This parameter determines:
- whether call information presented on the display during incomi
ng, ongoing and
outgoing call shall be suppressed when viewing a message
- whether an ongoing call shall be disc
onnected when receiving a PTT invitation with
Answer mode set to “Automatically”.
0 = Call indication will override all messages and ongoing call is never disconnected
(defaul
t
).
1-9 = Comparison with message priority; highest priority will be shown and PTT
invita
tion with higher priority causes disconnection of ongoing call.
10 = Call indication on the display will always be suppressed and ongoing call will always
be disconnected by a PTT invitation.
The tables below sh
ow examples of priority set
t
ings and how they affect the handset’s
behaviour.
Call prio PTT invitation
(prio)
1
Disconnection of ongoing call?
0 1 No, since this call priority setting overrides all
PTT invitations regardless
of priority.
6 6 No, an ongoing call will not be disconnected
when
the priority is equal.
2 1 Yes, immediately since the PTT priority is set to
1 and also is higher than Call priority.
3 2 Yes, after 10 seconds since the PTT priority is
higher than Call priority.
10 1 Yes, immediately since the PTT priority is set to
1 and also is higher than Call priority.
10 2 Yes, after 10 seconds since the PTT priority is
higher than Call priority.
Table 1. Call prio vs PTT prio
Call prio Displayed Message
(prio)
Call information suppressed?
0 1 No, since this call priorit
y
setting overrides all
messages regardless of priority.
7 6 Yes, since the priority of the displayed
message is hi
gher than the incoming call.
6 6 Yes, since the message is considered as most
important wh
en the priority is equal.
1 3 No, since the priority of the incoming call is
higher than the displayed message.
10 1 Y
es, the call information will always be
suppr
ess regardless of the message priority.
Table 2. Call prio vs Message prio
1.PTT invitation received as incoming call has always priority 6, while PTT invitation received as message
can have priority 1 - 9 depending on configuration.

ASCOM D62 Specifications

General

Brand	ASCOM
Model	D62
Category	Handsets
Language	English