5555
5555
55
20323163en_ba_a0
Additional settings
... Programming a speed dial key with a function... Programming a speed dial key with a function
... Programming a speed dial key with a function... Programming a speed dial key with a function
... Programming a speed dial key with a function
Press the OK key to display »Save«.
Press the right arrow key (>) until »Function F« is displayed.
Press the OK key to confirm. An »F« is shown after the »M«.
Enter the function code (see list of functions below) and press the OK key to
confirm.
If you wish to exit the menu, hold down the ESCAPE key.
The following functions may be assigned:
F01 Manual rejection of incoming calls
F02 xx..xx Send DTMF .
F03 xx..xx Send keypad
F04 xx Park/retrieve active call via Code xx.
F05 Interception (MCID)
F06 Three-party conference
F07 Call transfer
F08 Microphone off (Mic Mute) and on.
F11 xx..xx Direct dial
(no additional function permissible).
F21 xx..xx Unconditional call forwarding to number xx..xx.
F22 xx..xx Call forwarding to number xx..xx on no answer.
F23 xx..xx Call forwarding to number xx..xx on busy.
F31 Activate user A
F32 Activate user B
F33 Activate user C
F50 ETV
®
Online query
F51 Send SMS (with editing option)
F52 Send SMS direct
➭
You can also save these functions in the phonebook. Follow the same procedure
described in the section on »Phonebook« under »Assigning options to numbers« but
enter a function instead of an option.
To Next Page
Loading...
