TD 92579EN
15 February 2012 / Ver. H
Installation and Operation Manual
IP-DECT Base Station & IP-DECT Gateway (software version 5.0.x)
122
4 Click “OK”.
Call Number Mappings
Call number (CGPN/CDPN) mapp
ings are described in Call Number (CGPN/CDPN) Mappings
on page 118.
8.13.5 Routes – Configuration
Call routing determines which calls are able to
be accepted by the gateway and where
they are to be switched.
1 Select Gateway > Routes.
All configured routes are shown in a routing table.
2 a. If no routes have been configured, click on the in front of From.
b. Add a new
route by clicking on the leftmost in the route which you want to
insert the new route after.
Note the order of the routes here. The new r
oute is always inserted after the current
entry. A new window opens.
• Supress Subaddress Suppresses the transmission
of “Subaddresses” on the
interface.
Insert Map
below
Insert Map
above
Insert Route below Edit CGPN MapEdit Route
To Next Page
Loading...
Need help?
General
