TD 92579EN
15 February 2012 / Ver. H
Installation and Operation Manual
IP-DECT Base Station & IP-DECT Gateway (software version 5.0.x)
57
5 Repeat step 3 - 4 for all handsets.
Note: For
safety reasons, when the Anonymous Registration is finished change the
Subscription Method to "Disable"otherwise anyone could register to the IP-DECT System.
See below for more information.
6 Select DECT > System.
7 Disable anonymous registration by selecting
"Disable" in the Subscription drop-
down list. Click "OK".
7.13.2 Individual Registration
1 Select DECT > System.
2In the Subs
criptions drop-down list, select "With System AC" or "With User AC".
Click "OK".
Tip: See
also 8.5.2 Set Subscription Method on page 89 for more information.
3 Select "Users".
4 Click "New".
5 Enter the following information in the corresponding text fields:
Field name Description
Max.
characters
• Long Name Mandatory, the name of the us
er, need to be unique
throughout the system.
30
• Display
Name
Optional and only available when using the Ascom
V
oIP Gateway, the calling or called party name will be
shown in the handset display (depending on whose
handset).
30
• Name Optional, the user name. 30
• Number Mandatory, the phone number extension, need to be
un
ique throughout the system.
30
• Password Optional, is used for registration towards the
gate
keeper.
30
• Idle Display Optional, will be shown in the
handset display when
the handset is idle.
47
• IPEI / IPDI Mandatory, the unique identification number of the
hand
set.
• Auth. Code Optional, the individual authentication code for this
user
. Automatically created by default. Can be
modified manually.
6 Perform an "over air subscription" using the individual authentication code. For
in
formation on how this is done, see the reference guide of the handset.
7 Click "OK".
To Next Page
Loading...
Need help?
General
