ASCOM IPBL User Manual

TD 92579EN
15 February 2012 / Ver. H
Installation and Operation Manual
IP-DECT Base Station & IP-DECT Gateway (software version 5.0.x)
50
5 Select/Edit any of the following settings:
• Long Name
• Name (NOTE: This field is used for login)
• Password
•Confirm Password
6 Click "OK".
Delete a User Administrator
1 Login as System Administrator (see 7.3.5 System Administrators on page 47).
2 Select "Users".
3 Click "show".
4In the User Administrators section, click the hyperlink to be deleted below the Long
Name heading. An Edit User window is opened.
5 Click "Delete".
The User Administrator is deleted and the windows is closed.
7.4 Configure the Mobility Master
In a system with two or more Masters (Multiple Master system), a Mobility Master must be
configured. For more information on Multiple Master Systems, see the applicable System
Planning documentation for IP-DECT.
This section describes how to configure the Mobility Master. Each configuration step is
briefly described in the step list below. For more detailed information see the
corresponding subsection in 8 Operation on page 60.
1 Determine the address and access the GUI, see 7.2 Access the GUI on page 42.
2 Change the default password, see 7.2.2 Change the Default Password on page 44.
3 Set a static IP address and set DHCP to off, see 8.2.2 Set a Static IP Address on page
80.
4 Set the mode to Mobility Master, see 8.5.18 Select Mobility Master Mode on page
97.
5 Write a login name and enter a password, see 8.5.18 Select Mobility Master Mode
on page 97.
6 Connect to other Mobility Master(s), see 8.5.19 Connect Mobilty Master to other
Mobility Master(s) on page 98.
7 Enter the Time Server address, see 8.1.5 Configure the NTP Settings on page 68.
7.5 Configure the Standby Mobility Master
It is recommended to have a Standby Mobilty Master in a Multiple Master IP-DECT system.
This section describes how to configure the Standby Mobility Master. Each configuration
step is briefly described in the step list below. For more detailed information see the
corresponding subsection in 8 Operation on page 60.
1 Determine the address and access the GUI, see 7.2 Access the GUI on page 42.
2 Change the default password, see 7.2.2 Change the Default Password on page 44.

ASCOM IPBL Specifications

General

Brand	ASCOM
Model	IPBL
Category	Gateway
Language	English