TD 92579EN
15 February 2012 / Ver. H
Installation and Operation Manual
IP-DECT Base Station & IP-DECT Gateway (software version 5.0.x)
47
User administrators can only administer users. They can view but not create or manage
other user administrator accounts.
Login as User Administrator
To login as a user administrator:
1 Follow 7.2 Access the GUI on page 42 and access the device using a web browser.
2 Click the link labelled User Administration.
A login window is opened.
3 Enter user name and password for a user administrator.
4 Click "OK" to login.
5 Click the "Show" link.
6 The User Administration page is displayed.
See the figure below for a sample.
Figure 21. User Administration Sample.
The right side of the page consists of two list sections:
• User Administrators in the upper right section. Note: this section is read-only since a
user administrator cannot manage other user administrators. See
Managing User
Administrators on page 49.
• Users in the lower right section. Refer to 7.13 Add Users on page 55.
7.3.5 System Administrators
IPBS/IPBL devices are factory delivered with a default system administrator account.
Log in as System Administrator
To login as a system administrator:
1 Follow 7.2 Access the GUI on page 42 and access the device using a web browser.
2 Click the link labelled System Administration.
A login window is opened.