TD 92579EN
15 February 2012 / Ver. H
Installation and Operation Manual
IP-DECT Base Station & IP-DECT Gateway (software version 5.0.x)
60
8 Operation
This section describes the settings in the Configuration and Administration menu, each
subsection represents a sub menu to the Configuration and Administration menu.
Some changes require a reset in order to take effect. It is possible to do several changes
before resetting the IPBS/IPBL.
The GUI for the IPBS and IPBL are similar. Screen shots from the IPBS are used as default.
8.1 General
This section describes how to do the following configurations and settings.
• Name the equipment
• Change Administrator User Name and Password
• Kerberos
• Configure automatic firmware update
• Configure the NTP settings
• Configure Logging
• Configure the HTTP settings
Figure 22. Assigning a administrator name, username, and password.
8.1.1 Name the IPBS/IPBL
Each IPBS/IPBL can be assigned a name. It is recommended to assign a descriptive name
for example IPBS/IPBL location.
1 Select General > Admin.
2 Enter a name in the Device Name text field.
3 Click "OK".
8.1.2 Change User Name and Password
The user name and password are used to access the IPBS/IPBL through the web GUI.
To Next Page
Loading...
Need help?
General
