ashtech G12 - Page 65

51
Commands
IONOSPHERIC AND TROPOSPHERIC MODELLING
$PASHQ,ION Query ionospheric measurements 73
MEMORY
$PASHS,INI Clear internal and BBU memory 72
$PASHQ,MEM Query memory status 77
$PASHQ,RSO Query receiver serial number and options 95
$PASHS,RST Restore default parameter settings 95
$PASHS,SAV Save parameters to memory 95
MISCELLANEOUS PARAMETERS
$PASHS,CRR Set type of code correlator 56
$PASHQ,CRR Query code correlator setting 56
$PASHQ,DUG Query UTC-GPS time difference 65
$PASHS,LTZ Set local zone time 77
$PASHS,SUI Enable satellite usage indicator 101
PHOTOGRAMMETRY/1PPS/STROBE
$PASHS,PHE Set photogrammetry edge 81
$PASHQ,PHE Query photogrammetry parameters 82
$PASHS,PPS Set period and offset of 1PPS signal 87
$PASHQ,PPS Query timing pulse parameters 88
$PASHS,STB Set measurement strobe parameters 100
$PASHQ,STB Query measurement strobe parameters 101
POSITION COMPUTATION
$PASHS,FIX Set fixed altitude mode 67
$PASHS,FUM Select UTM zone to be held fixed 68
$PASHS,FZN Enable/disable fixed UTM zone mode 68
$PASHS,ERM Set error masks for position computations 66
$PASHQ,GDC Query position as rendered in user-defined grid coordinates 69
$PASHS,PEM Set elevation mask for position computation 81
$PASHS,PMD Set position computation mode 82
$PASHS,SEM Set secondary elevation mask 96
Table 4.3. Receiver Commands (Continued)
Command Description Page
G12RevD.book Page 51 Tuesday, April 2, 2002 4:33 PM