ASIX Forte - Page 102

Page 102
2017-06-29
Added chapter about MultiUP utility.
2017-10-30
Description of the AVR UPDI connection has been
added.
Added description of "When using Windows
Messages disable other warnings" option.
Added description of "Write checksum to log file"
option.
2017-11-22
Added description of RL78 connection.
2018-02-19
HPRAVR chapter moved.
2018-03-28
Added description of "Device info" menu item.
2018-05-17
Added RX600 connection description.
Added description of Renesas RX600 settings.
2018-06-07
Added AT89C51CC01UA connection decription.
2018-07-30
Added a note to Debug fuse of MCU PIC.
Added a note to AVR UPDI files mapping.
2018-08-10
Added description where Linux FTDI driver can be
found.
Added a note to commandline parameters.
2019-01-25
Description of saving fuses to ini function has been
added.
Write RC osc Adjustment function description has
been added.
2019-01-31
Added description of how to read the ProgressBar
value in the quiet mode.
2019-02-26
Added a note for DS28E05.
Added description of Read address function
Added description of Windows Messages wParam of
24 and 25.
2019-04-23
Added description of /df parameter, description of /p
and /o parameters has been updated.
2019-06-26
Updated description of /s commandline parameter.
Added description of "Lock project" function.
Added description of function setting actual SN from
log file.
2019-07-26
Added HCS08 connection description.
2019-09-20
Company address has been changed.
2019-10-24
HCS08 note has been modified.
Added chapter about up_control.dll
2019-12-18
Added AVR HVP connection description.
2020-01-10
Added Autoload next file function description.
2020-03-31
Added description of /conf parameter.
Added list of parameters which are transferred to
already running UP instance.
Added description of the file locations only
programming.
Added description of the option switching off the
Device ID check.