ASIX Forte - Page 4

32
3.1 Driver Installation
32Windows Operating Systems3.1.1
Windows 7 and later 32
Older supported Windows versions 32
33Linux3.1.2
33
3.2 Driver Updating
Usage under Linux
34
4
UP SOFTWARE
36
5
36
5.1 Abbreviations Used
36
5.2 Installation
36
5.3 Device Programming
36Programmer Selection5.3.1
37Projects5.3.2
37Device Type Selection5.3.3
38Program settings5.3.4
Delay for VDD switching on/off when supplied from
programmer
38
Production Programming Settings 39
Settings for Programming During Development 39
Programmer Settings 40
Fuses and Working with Them 40
40Programming5.3.5
Differential Programming 41
41
5.4 Further Features
41Setting the GO Button5.4.1
41Mass Production5.4.2
42Serial Numbers5.4.3
Format of Files with Serial Numbers 44
Data Record 44
Example of File with Serial Numbers 44
45Calibration Memory Support5.4.4
Working with Calibration Memory When Erasing a
Device in UV Eraser
45
Working With Calibration Memory in Devices With
Flash Memory
45
45
5.5 Program Controls
46Toolbar5.5.1
46Status Bar5.5.2
46Menus5.5.3
File Menu 46
File ➙ New 46
File ➙ Open... 46
File ➙ Open next file... 46
File ➙ Open next: 47
File ➙ Reload actual file 47
File ➙ Save 47
File ➙ Save as... 47
File ➙ Import data memory from file... 47
File ➙ Open file with data memory automatically 47
File ➙ New project 47
File ➙ Open project... 47
File ➙ Save project... 48
File ➙ Close project 48
File ➙ Recent projects 48
File ➙ Read calibration data... 48
File ➙ Save calibration data... 48
File ➙ Export to bin... 48
File ➙ Exit 48
Edit Menu 48
Edit ➙ Fill with value... 48
Edit ➙ Text insert... 49
Edit ➙ Fill selected location with RETLW 49
View Menu 49
View ➙ Code/main memory 49
View ➙ Data memory 49