Page 50
View ➙ Display programmer form
Keyboard shortcut: Ctrl+P
The programmer form is always visible. This function
moves the programmer form to the front (the editor gets
focus).
Device Menu
Device ➙ Program
Keyboard shortcut: Shift+F5
This command opens a sub-menu with programming
options. Some items may be inaccessible for certain
device types.
▸ Program all
Keyboard shortcut: F5
This command erases the device, checks the erasure,
programs it and verifies the programming result in the
whole device. The Device ID check and the Code/Data
Protection check are performed prior to this operation.
The behavior of this command is influenced by the
program settings - see Program settings.
▸ Program all except data memory
A keyboard shortcut can be assigned in Options ➙ Key
shortcuts.
This command works the same as Program all with the
exception that it does NOT erase, program or verify the
data memory.
Devices without a data memory do not have this
command available and their programming is done using
the Program all command.
This command cannot be used in some cases that use
Code or Data Protection. For these, the program offers
the command Erase whole device and program also
data memory (with data currently in the editor).
▸ Program code/main memory
A keyboard shortcut can be assigned in Options ➙ Key
shortcuts.
This command erases the code/main memory, checks the
erasure, programs and checks the programming result.
To Next Page
Loading...