Page 51
▸ Program data memory
A keyboard shortcut can be assigned in Options ➙ Key
shortcuts
This command erases the data memory, checks the
erasure, programs and checks the programming result.
▸ Program configuration memory
A keyboard shortcut can be assigned in Options ➙ Key
shortcuts
This command programs the configuration memory and
ID positions (if device contains them) and checks the
programming result
▸ Program differentially
Keyboard shortcut: Ctrl+F5
This command programs the device applying the
differential method. This means that it reads the device
and programs only those cells the content of which differs
from the editor.
This command is available only for those devices that
support such treatment (not all devices do).
If a device has the Code/Data Protection active,
differential programming makes no sense. The program
performs complete programming instead, including
device erasure.
▸ Differential program data memory
A keyboard shortcut can be assigned in Options ➙ Key
shortcuts
This command programs the data memory applying the
differential method. Its function is identical with
differential programming of the code/main memory.
This command is available only for those devices that
support such treatment (not all devices do).
If a device has the Code/Data Protection active,
differential programming makes no sense. The program
performs complete programming instead, including
device erasure.
Differential programming of a data memory should be
used for AVR microcontrollers if the user needs to
reprogram the data memory only without previously
erasing the device.
▸ Mass Production
A keyboard shortcut can be assigned in Options ➙ Key
shortcuts
This command opens a window for easy programming of
several identical devices with the same or very similar
program(s) (except their serial numbers and the like). For
further information see Mass Production.
Device ➙ Read
Keyboard shortcut: Shift+F6
This command opens a sub-menu with device reading
options. Some of them may be not available for certain
device types.
▸ Read all
Keyboard shortcut: F6
This command reads the content of the whole device.
▸ Read all except data memory
A keyboard shortcut can be assigned in Options ➙ Key
shortcuts
This command reads the content of the whole device
except the data memory.
▸ Read code/main memory
A keyboard shortcut can be assigned in Options ➙ Key
shortcuts
This command reads the content of the code/main
memory.
To Next Page
Loading...