Page 52
▸ Read data memory
A keyboard shortcut can be assigned in Options ➙ Key
shortcuts
This command reads the data (EEPROM) memory.
▸ Read configuration memory
A keyboard shortcut can be assigned in Options ➙ Key
shortcuts
This command reads the configuration memory and ID
positions (if device contains them).
▸ Read address
This function enables reading of data from user filled
address, it supports MCUs ARM via SWD interface.
Device ➙ Verify
Keyboard shortcut: Shift+F7
This command opens a sub-menu with device memory
content verification options. Some of them may be not
available for certain device types
▸ Verify all
Keyboard shortcut: F7
This command compares the content of all device
memories with the current content of HEX editors.
▸ Verify all except data memory
A keyboard shortcut can be assigned in Options ➙ Key
shortcuts
This command compares the content of all device
memories except its data memory with the current
content of HEX editors.
▸ Verify code/main memory
A keyboard shortcut can be assigned in Options ➙ Key
shortcuts
This command compares the content of the code/main
memory with the current content of code/main memory's
HEX editor.
▸ Verify data memory
A keyboard shortcut can be assigned in Options ➙ Key
shortcuts
This command compares the content of the data memory
with the current content of data memory's HEX editor.
▸ Verify configuration memory
A keyboard shortcut can be assigned in Options ➙ Key
shortcuts
This command compares the content of device's
configuration memory and ID positions (if device contains
them) with settings in the Configuration window.
Device ➙ Erase
Keyboard shortcut: Shift+F8
This command opens a sub-menu with device memory
erasing options.
Erasure verification (blank check) is automatically
performed after each erasing. This verification can be
skipped by choosing Options ➙ Program settings ➙
Programming ➙ Do not perform blank check after
erasing. This can save time with some devices.
▸ Erase all
Keyboard shortcut: F8
This command erases the whole device.
To Next Page
Loading...