Asycube - Asyril SA
Programming Guide
10/83
3. How to use the Asycube
This chapter gives the main information about the use and tuning of the Asycube. It shows
general information and behavior, presents the main procedure from setup to running in
production with an Asycube and describes then each step. The next chapters will detail the
chosen working mode.
3.1. Integration modes
Different ways of integration are available. Here below is a brief description of the main ones.
More information is then available in the corresponding section. The main tasks necessary to
use, configure and integrate the Asycube are described depending the chosen integration
mode. The next tables and figures describe the tasks in charge of the Asycube and the ones
due to the integrator. The light blue color represents the levels offered by Asyril, the white
one the levels in charge of the integrator.
To Next Page
Loading...
