Asyril Asycube 530 Programming Guide

Asycube - Asyril SA
Programming Guide
© Copyright Asyril S.A.
000.101.572
Version : A1
46/83
5.4.10. Sequence, centering and feeding execution
Code
Label
Command
Response
Remark
ES
Execute Sequence
{ES:(p1;p2;etc)}
{ES:(p1;p2;etc)}
Execute the sequence depending of
given parameters.
EC
Execute Centering
{EC:(p1;p2;etc)}
{EC:(p1;p2;etc)}
Execute centering depending of given
parameters.
EF
Execute Feeding
{EF:(p1;p2;etc)}
{EF:(p1;p2;etc)}
Execute feeding depending of given
parameters.
Table 5-16: Execute commands
P1, P2 are parameters given in a specific order and separate with a semicolon. The ranges of
parameters are described in this generic chapter.
NOTE :
To execute a sequence, a centering or a feeding, the order of the parameters has to be
strictly respected.

Asyril Asycube 530 Specifications

General

Brand	Asyril
Model	Asycube 530
Category	Industrial Equipment
Language	English