118
Smart call blocker
Call block settings
f Press and hold MUTE/DELETE to erase all characters.
f Press TONE to change the next letter to upper or lower case.
8. Press SAVE to store your block entry.
Using the telephone base:
1. Press MENU on the telephone base in idle mode to enter the main menu.
2. Press qCALLER ID or pDIRECTORY to scroll to Smart call blk, then press
SELECT.
3. Press qCALLER ID or pDIRECTORY to scroll to Block list, then press SELECT.
4. Press qCALLER ID or pDIRECTORY to scroll to Add new entry, then press
SELECT.
5. When the screen displays ENTER NUMBER, use the dialing keys to enter a
number (up to 30 digits).
f Press qCALLER ID or pDIRECTORY to move the cursor to the le or right.
f Press X/DELETE to erase a digit.
f Press and hold X/DELETE to erase all digits.
f Press and hold REDIAL/PAUSE to enter a three-second dialing pause (a p
appears).
-OR-
Copy a number from the redial list by pressing REDIAL/PAUSE. Then, press
qCALLER ID, pDIRECTORY or REDIAL/PAUSE repeatedly to nd the desired
number. Press INSERT to copy the number.
6. Press NEXT to move on to the name.
7. When the screen displays ENTER NAME, use the dialing keys to enter
a name (up to 15 characters). Press a key repeatedly until the desired
character appears. The rst character of every word is capitalized.
f Press qCALLER ID or pDIRECTORY to move the cursor to the le or right.
f Press 0 to add a space.
f Press X/DELETE to erase a character.
f Press and hold X/DELETE to erase all characters.
f Press TONE to change the next letter to upper or lower case.
8. Press SAVE to store your block entry.
Notes:
f Numbers saved in your directory can also be saved to the block list.
f If you save a block entry that has already been saved to the allow list, the entry in the allow list will be removed.
To Next Page
Loading...
Need help?
General
