119
Smart call blocker
Call block settings
Review block list:
Using a cordless handset or the telephone base:
1. Press MENU in idle mode to enter the main menu.
2. Press
CID or
DIR on the handset, or press qCALLER ID or
pDIRECTORY on the telephone base to scroll to Smart call blk,
then press SELECT.
3. Press
CID or
DIR on the handset, or press qCALLER ID or
pDIRECTORY on the telephone base to scroll to Block list, then
press SELECT twice.
4. Press
CID or
DIR on the handset, or press qCALLER ID or
pDIRECTORY on the telephone base to browse through the
block entries.
Note: Block list is empty appears if there are no block entries.
Save a caller ID log entry to block list:
Using a cordless handset:
1. Select a desired entry in the caller ID log (see Review the caller ID log on
100).
2. When the desired entry appears, press SAVE.
3. Press
CID or
DIR to highlight Block list., and then press SELECT. The
screen displays Edit number.
4. Use the dialing keys to edit the number.
f Press
CID or
DIR to move the cursor to the left or right.
f Press MUTE/DELETE or BACKSP to backspace and erase a digit.
f Press and hold MUTE/DELETE to erase the entire entry.
f Press and hold REDIAL/PAUSE to insert a dialing pause (a p appears).
5. Press NEXT. The handset displays Edit name.
6. Use the dialing keys (page 90) to edit the name.
f Press
CID or
DIR to move the cursor to the left or right.
f Press 0 to add a space.
f Press MUTE/DELETE or BACKSP to erase a character.
f Press and hold MUTE/DELETE to erase all characters.
SMART CALL BLK
SCB On/Off
Block list
All o w lli s t
SELECT
BACK
BLOCK LIST
Review
Add new entry
Delete all
SELECT
BACK
To Next Page
Loading...
Need help?
General
