120
Smart call blocker
Call block settings
f Press # (pound key) to move the last word to the front. For example,
Johnson Charlie becomes Charlie Johnson when you press # (pound
key).
7. Press SAVE to conrm. The screen shows Saved to block list.
Using the telephone base:
1. Select a desired entry in the caller ID log (see Review the caller ID log on
page 100).
2. When the desired entry appears, press SAVE.
3. Press qCALLER ID or pDIRECTORY to highlight Block list, and then press
SELECT. The telephone base displays EDIT NUMBER.
4. Use the dialing keys to edit the number.
f Press qCALLER ID or pDIRECTORY to move the cursor to the left or right.
f Press X/DELETE or BACKSP to backspace and erase a digit.
f Press and hold X/DELETE to erase the entire entry.
f Press and hold REDIAL/PAUSE to insert a dialing pause (a p appears).
5. Press NEXT. The telephone base displays EDIT NAME.
6. Use the dialing keys (page 90) to edit the name.
f Press qCALLER ID or pDIRECTORY to move the cursor to the left or right.
f Press 0 to add a space.
f Press X/DELETE or BACKSP to erase a character.
f Press and hold X/DELETE to erase all characters.
f Press # (pound key) to move the last word to the front. For example,
Johnson Charlie becomes Charlie Johnson when you press # (pound key).
7. Press SAVE to conrm. The telephone base shows Saved to block list.
Edit a block entry:
Using a cordless handset:
1. Search for the desired entry in the block list (see Review block list on
page 117).
2. When the desired entry displays, press EDIT. The screen displays Edit
number along with the phone number to be edited. If you only want to
edit the name, skip to Step 4.
To Next Page
Loading...
Need help?
General
