ATEQ F580 - Error Messages; 1. Error for the Central

Chapter 6 – Error messages
UM-18400E-U ATEQ F580 User manual Page 155/168
Chapter 6
ERROR MESSAGES
The ATEQ F580 or the measurement head can display error messages if there are
operational problems.
1. ERROR FOR THE CENTRAL
PROBLEM MESSAGE DISPLAYED
Communication error in the network,
(in this example, the head number 2
doesn't communicate with the
central).
The icon appears on the head
corresponding with the fault.
Action : verify the network
connection, contact ATEQ after sales
department for repair if the problem
persists.
ERROR
H01 H02 H03
F5 ??? INT