Chapter 4 Functions of the instrument
UM-18400E-U ATEQ F580 User manual Page 64/168
1.2. RUN MENU
The "RUN" menu allows the management of measurement unit test cycles.
1.2.1. Unit (head) XX
For more comprehensive information concerning the measurement units’ cycles, refer to
their user manuals.
1.2.1. 1) Active program
To access the active program of the measurement unit and choose a program amongst
the existing ones.
1.2.1. 2) Special cycle
To select the special cycle to be started in the measurement unit, refer to paragraph 3
of this chapter.
1.2.2. "START" key
The confirmation with a "YES" allows the starting of a test cycle or special cycle on the
corresponding unit with the cycle start key of the central.
This function enables the carrying out of test or special cycles on a few or all of the
measurement units from the central unit.
Depending on the position in the menus, the test program (or special cycle) is started on
the measurement unit, or on all the measurement units selected in the "START KEY"
menu. Refer to chapter 3, paragraph 7 "Launching a cycle".
To Next Page
Loading...