Chapter 3 – Start-up and settings
UM-18400E-U ATEQ F580 User manual Page 38/168
3. ALLOCATION OF THE OUTPUTS
The inputs / outputs can be set according to three different configurations, extended
mode, standard mode or compact mode. For the configuration of the outputs, refer to
chapter 1 paragraph 4.3.8 "J7 outputs connector" and paragraph 4.3.10 "J8 inputs
connector".
3.1. OUTPUTS ALLOCATION MODE
Choice of the outputs mode: place the
cursor in front of "I/O MODE" then
confirm, a window appears, choose
between the three modes and confirm.
CONFIG
CENTRAL
NETWORK
INSTALL
HEAD : 01
I/O MODULES : 01
I/O MODE : ETENDU
I/O DISTRIBUTION
IDENTIFICATION
LANGUAGE : ENGLISH
11:08:13 18/06/2002
EXTENDED
STANDARD
COMPACT
Note: the "Extended", "Standard" and "Compact" modes also concern the J8 inputs
connector. The measurement unit and number selection modes are different depending
on the chosen mode. Refer to chapter 1, paragraph 4.3.10 "J8 inputs connector".
To Next Page
Loading...