ATEQ F580 - 1.5. Configuration Menu

Chapter 4 Functions of the instrument
UM-18400E-U ATEQ F580 User manual Page 70/168
1.5. CONFIGURATION MENU
This menu allows the configuration of the central, the entire network as well as the
accessories when they are used.
1.5.1. "NETWORK" menu
1.5.1. 1) "INSTALLATION" menu
This menu enables the configuration of the network during its installation or its servicing.
For the installation of the network, refer to chapter 3, paragraph 2 "Start-up of the
network".
Use the navigation keys to move the
cursor till it is in front of the
"INSTALLATION" menu then confirm
with ENTER.
CONFIG
CENTRAL
NETWORK
INSTALL
LANGUAGE : ENGLISH
PRINTER
HOUR
BACKLIGHT
HEAD NAME
HEAD 01 : F5 :
10
:
5
9
:
3
2
18/06/2002
In the "Head (measurement unit)"
menu it is necessary to indicate the
quantity of measurement units which
are installed in the network.
See chapter 3, paragraph 2 "Start-up
of the network".
CONFIG
CENTRAL
NETWORK
INSTALL
HEAD : 02
I/O MODULES : 01
IDENTIFICATION
I/O MODE : EXTENDED
I/O DISTRIBUTION
LANGUAGE : ENGLISH
11:02:59 18/06/2002
Choice of the outputs mode: place the
cursor in front of "I/O MODE" then
confirm, a window appears, choose
between the three modes and confirm.
See chapter 3, paragraph 3 "Allocation
of the outputs".
CONFIG
CENTRAL
NETWORK
INSTALL
HEAD : 01
I/O MODULES : 01
I/O MODE : ETENDU
I/O DISTRIBUTION
IDENTIFICATION
LANGUAGE : ENGLISH
11:08:13 18/06/2002
EXTENDED
STANDARD
COMPACT