ATEQ F580 - Page 81

Chapter 4 Functions of the instrument
UM-18400E-U ATEQ F580 User manual Page 71/168
In the "I/O DISTRIBUTION" menu, a
list of measurement units (heads) and
their allocation to the modules
appears. See chapter 3, paragraph 3
"Allocation of the outputs".
CONFIG
MODULE 1 : HEAD 01
MODULE 2 : HEAD 02
11
:
0
8
:
13
18/06/2002
Using the up and down arrows, place
the cursor in front of
"IDENTIFICATION" and validate. See
chapter 3, paragraph 2 "Start-up of the
network".
CONFIG
CENTRAL
NETWORK
INSTALL
HEAD : 02
I/O MODULES : 01
IDENTIFICATION
I/O MODE : EXTENDED
I/O DISTRIBUTION
LANGUAGE : ENGLISH
11:08:13 18/06/2002
1.5.2. "LANGUAGE" menu
This menu enables the choosing of the language displayed on the screen. Several
languages are available. Two are installed when the instrument is manufactured, with
English being the default language and the other as chosen by the customer.
Access to the "LANGUAGE" menu and
modification of the language if
necessary.
CONFIG
CENTRAL
NETWORK
INSTALL
HEAD : 02
I/O MODULES : 01
IDENTIFICATION
I/O MODE : EXTENDED
I/O DISTRIBUTION
LANGUAGE : ENGLISH
11:06:45 18/06/2002
ENGLISH
FRANCAIS