Chapter 3 – Start-up and settings
UM-18400E-U ATEQ F580 User manual Page 36/168
2. START-UP OF THE NETWORK
At the start-up of the network, it is necessary to identify the measurement units by giving
an address to each unit in the order required.
To number the units in the network, use the following procedure:
Turn the key to the ACCESS position.
MAIN MENU
RUN CONFIG
PARAMETERS SERVICE
DISPLAY RESULTS
10:57:22 18/06/2002
Then, with the navigation arrows,
select the "CONFIG" menu.
MAIN MENU
RUN CONFIG
PARAMETERS SERVICE
DISPLAY RESULTS
10:57:22 18/06/2002
Press on the ENTER button to enter
the configuration menu.
CONFIG
CENTRAL
NETWORK
LANGUAGE : ENGLISH
PRINTER
HOUR
BACKLIGHT
HEAD NAME
HEAD 01 : F5 :
HEAD 02 : F5 :
10:59:32 18/06/2002
Use the navigation keys to move the
cursor till it is in front of the
"INSTALLATION" menu then confirm
with ENTER.
CONFIG
CENTRAL
NETWORK
INSTALL
LANGUAGE : ENGLISH
PRINTER
HOUR
BACKLIGHT
HEAD NAME
HEAD 01 : F5 :
To Next Page
Loading...