Chapter 4 Functions of the instrument
UM-18400E-U ATEQ F580 User manual Page 65/168
1.3. PARAMETERS MENU
The "PARAMETERS" menu enables the management of the measurement units’ test
parameters.
For more detailed information concerning the measurement units’ parameters, refer to
their user manuals.
1.3.1. Copy Paste
This function has for aim to recover the test parameters of a measurement unit to insert
them into another measurement unit.
To use this function, the measurement units must absolutely be identical, in their
test type, configuration and in their software and hardware versions. If the copy paste
operation is not valid, the instrument does not authorise the function to avoid the
entering of parameters from one unit into another but different unit.
1.3.2. Measurement unit (head) XX
To manage the test cycles inside a measurement unit, refer to its user manual.
When entering the "HEAD XX" menu, after having chosen the program number, it is
possible to modify the set of parameters of the program for the chosen unit.
To Next Page
Loading...